PDA

View Full Version : Sticky: Full ZChip Visual Installation Instructions

TTP Engineering
11-13-2008, 06:41 AM
http://i4.photobucket.com/albums/y117/dsm95hybrid/REMOVE_MIVEC_COVER.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/LOCATE_THE_SENSOR_.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/INSERT_A_PICK.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/REMOVE_RETAINING_CLIP_FROM_SENSOR_D.jpg
TTP Engineering
11-13-2008, 06:42 AM
http://i4.photobucket.com/albums/y117/dsm95hybrid/PULL_OUT_OEM_SENSOR_HARNESS_FROM_SE.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/LOCATE_TO_SENSOR_HARNESS_END.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/REMOVE_AFTERMARKET_CLIP_FROM_HARNES.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/INSERT_SENSOR_ENDS_INTO_PLACE.jpg
TTP Engineering
11-13-2008, 06:43 AM
http://i4.photobucket.com/albums/y117/dsm95hybrid/LOCATE_ZCHIP_HARNESS_AND_OEM_HARNES.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/INSERT_LOCKING_CLIP_PUSH_DOWN_TO_LO.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/INSERT_LOCKING_CLIP_TO_ENGINE_HARNE.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/INSERT_LOCKING_CLIP_INTAKE_MANIFOLD.jpg
TTP Engineering
11-13-2008, 06:43 AM
http://i4.photobucket.com/albums/y117/dsm95hybrid/PUSH_DOWN_RETAINING_CLIP.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/REINSERT_HARNESS_CLIPS.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/FOLDING_OVER_TACH_WIRE.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/LOCATE_WHITE_WIRE.jpg
TTP Engineering
11-13-2008, 06:43 AM
http://i4.photobucket.com/albums/y117/dsm95hybrid/3M_TAP_OPEN-1.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/CLOSE_3M_COVER_INSURE_TACH_DOES_NOT.jpg

http://i4.photobucket.com/albums/y117/dsm95hybrid/CLAMP_DOWN_ON_3M_TAP.jpg
tsitalon1
11-13-2008, 01:18 PM
Stop biting your nails:D
Tunerhead
11-13-2008, 03:57 PM
Wow! Very Good!!!! It doesn't get any simpler than this.........:)
Gibby860
12-07-2008, 11:34 PM
Very quick application and no messing with a ECU flash. Very intrested now.
JONralli09
02-04-2009, 01:07 AM
ok where do you mount the zchip??
TTP Engineering
02-05-2009, 01:13 AM
On a Ralliart 09 probably somewhere near the drivers headlight.